rolnas
(kanysrolnas@gmail.com)  2010-03-07 13:28:09 90.177.69.127
Hallo
I need servicemanual(schema)for Simmons SDS9. Can you help me please?

Mark Rose
(mark.j.rose2@btinternet.com)  2010-03-06 20:26:46 88.106.169.197
Hi, great site. I\'ve trying to restore a set of SDS9 pads. Does anyone know
whether it is possible to get parts for the tom arm clamps that are actually
inside the pads? Previous owners have either broken the clamps or stripped the
threads and replaced the tension rods with ordinary screws/nuts. In particular
the bass drum clamps are broken. I\'d rather not break up another pad to get the
parts but source separately. Thanks

alberto
(vanderbilt2007@yahoo.com.mx)  2010-03-02 20:54:45 201.153.82.68
hi.i need to repair my simmos sds 1000 i need the block diagram and also i
need to know where to buy the chips to repair it,or the adress where i can buy
it in usa.

Milo
(xmilo@hotmail.co.uk)  2010-02-28 20:18:30 80.41.147.7
Hello, I wondered if anyone might have some advice on how to get my SDX brain
looked at.. it was working one day, then switched it on another and it didnt
fire up.. Thanks

ALFONSO PACHES
(alfpaches@yahoo.es)  2010-02-19 10:24:29 81.203.49.41

Graham
(quiquebucho@hotmail.com)  2010-02-16 19:11:22 72.55.25.146
G\'day all!

Does anyone know (I can\'t remember) what file format the SDX uses for it\'s
disks? I seem to recall Motu\'s Mach Five as being able to read them, although I
never tried it myself. Ran into a guy that had a full library, but no SDX
anymore. Maybe the sample dump standard (SDS) or Sound Designer format(SDi)? Any
advice would be appreciated.

Graham

Jeffrey Prescott
(jeffprescott@gmail.com)  2010-02-16 17:11:41 173.9.29.133
Hello.
This site is such an amazing resource. Thanks so much for all you do here. I
just had a quick question to possibly get alittle help. I purchased some CB700
series Simmons pads that I\'d like to cleanup/refurbish but can\'t get a
definative answer as to how to safely take them apart. I downloaded the doc in
your PDF section that talked a bit about it but in trying to follow the info
outlined there I met with little success. I was wondering if you had any
pointers to get it done safely.
Thanks so much for your consideration

Take care

Jeffrey

e1375
(e1375@live.com)  2010-02-11 14:19:08 189.183.22.47
Does anybody know a procedure to reset a Portakit to factory settings?

After a battery replacement, I am having problems triggering notes from external
pads. If I try to play a drum roll, I can only trigger one (1) note every 2
seconds approx.

Internal pads are working fine, drum rolls trigger all notes. I guess resetting
it to factory, might solve the problem.

Help please,

Ed.

brian horton
(bvhorton@shaw.ca)  2010-02-06 06:15:36 24.67.9.40
Hi Wolfgang,i have the mtm which i want to trigger the roland R8 hi hat sounds
using the simmons sds 5 pedal plugged into the mtm(early serial numbers wireing
of sds 5) the mtm manual then shows a 1/4 inch mono jack out to the sds 5 hi hat
pedal in,which i guess also triggers the sds 5 when pedal is closed.The mtm
manual shows all of the 7 pads plgged into the mtm ,but does not show which pad
would be the hi hat for striking,would it be the pad pluged into the sds 5 ?,or
one of the seven pads pluged into the mtm with the same midi note number
??appreciate your help, thanks.

1AEE1
2010-01-31 21:02:58 152.73.73.32
Hi Wolfgang. I have some simmons gear to get rid off, Zurich based.I have a sds9
stashed in the cellar and am moving house.2 black Bass pads and about 12-14
pads(2 are damaged )rest are spotless. I will put onto ebay for interested
buyers,also 3 white pads and expander modules and sds8 module. Thanks a
mill...still keeping my sdsv thats a piece of history and added to my new
electronic kit setup...80\'s rule.
Happy playing to all electro - heads.

br

Mac